Spare parts hubs
1,8mm Spacer
Remove the spacer on your freehub to switch from HG10 to HG11 and from XD to XDR. Simply put the spacer on your freewheel body - then mount the cassette - done!
Bearing sets for front hubs
Original replacement bearings for all tune front hubs with 17mm axle or 20mm sleeve. Available in different configurations.
Bearing sets for rear hubs
Original replacement bearings for all tune rear hubs with 17mm axle. Available in different configurations.
Conversion kits for front hubs
New bike with a different axle type? No problem! Our hubs can be converted to fit a different axle type. This kit lets you change the axle standard of your front hub.
Upgrade-Kit to 15x110mm Torque Caps, for KillHill/Princess Boost, 6-bolt
This kit is used to upgrade your Boost front hub to Torque Caps. Easier to install your wheel, stiffer, that's the advantage of Torque Caps!
Conversion kit from 20x110 to 20x110 Boost for 20mm front hub
he axle standard of your 20mm front hub no longer matches your bike? With our conversion kit you can change the axle standard of your hub without tools!
Conversion kits for rear hubs
This kit lets you change the axle type of every tune rear hub to keep using your precious hubs after a fram change. Available in different configurations.
Freewheel kits
Thanks to the modular design of our hubs the current hub generation can be converted to every freehub standard. This conversion kit includes all the needed parts to perform the conversion.
Endcaps replacement right for rear hubs
Lost or broken your right rear hub endcap? Replace it yourself with this replacement endcap. All standards compatible with Tune hubs are available!
Pawl set
Replacement set of pawls for the freehweel mechanism. The pawls are made from Titanium and are intricately wire-cut.
Pawl spring set
Set of pawl springs to replace worn springs in the freehub mechanism. The springs are made from high quality spring steel and are especially made for our hub mechanism.
Shim Set
Set of inox shims in various thicknesses. The shims are used to adjust the axial play of the hub axle. Once set no readjustment is needed.
Shim set for Centerlock brake interface
These slotted shims made especially for Centerlock hubs eliminate the need to adjust the brake when switchting between multiple wheelsets
